To check wood-based panels for unbonded areas and air voids, an ultrasound signal is sent through the panel. In the case of a high-quality panel, the receiver will register about 10 % of the original signal.Unbonded areas or air voids within the panel deaden the ultrasound signal so that only about 1 % of the original signal is received.
The device can generate bursts with 50 or 30kHz frequency, 1kW power and 1000V amplitude. It is also able to measure all signal parameters and transmit this data to the control unit.
Copyright © 1989 - 2020 Optel. All rights reserved.
Limited, registered in the Companies Register by the regional court Wroclaw Fabryczna, VI Industrial Section of KRS, under the number 0000124439,
NIP: PL 8981047033, REGON 008375538, operating capital 364,500 PLN